Vintage Dynamic Element CB Microphone
This is a Vintage Dynamic Element CB Microphone made to add a unique quality to your vocals. It is completely passive so there is no power needed.
The Filter Control has been designed to cut feedback that sometimes occurs when using lo-fidelity microphones. It also provides you with a wider variety of tonal qualities compared to what would typically be available with a standard CB microphone.
The CB itself is a push-to-talk microphone and features a built in push-to-talk switch on the side of the mic (see video below for hands-free usage ideas). One way you can use the switch is to create manual tremolo or chopped vocal effects. This CB also pairs well with distortion/fuzz/overdrive effects as you have more control over extraneous noise or feedback, than you would if effects were used with standard microphones.
The control box that the CB microphone is attached to houses the filter circuitry and 1/4" output jack.
***An OPTIONAL clip is shown within the demo video where you can affix the control box to a microphone stand. ***Another optional item is a microphone clip which you can use to hold the CB microphone itself. There is a tip shared within the demo video that will allow a contant ON operation of the push-to-talk CB microphone.
The CB mic itself is used and the control box is New-Old-Stock along with knob and jack. Both CB mic and control box have light scuffs and scratches, nothing severe (no fractures).
See video for a demonstration of sounds/features of a similar model (with the same features) so you know what to expect:
https://youtu.be/4Ri0LkngK7s
Modifications:
1. Filter Knob-can be adjusted to filter/cut out high end frequency and/or unwanted feedback or pass signal at normal frequency
2. 1/4" Output Jack-connect to PA, mixer, etc.
3. ***Optional Control Box Mount-mount control box to a mic stand (see video for complete hands free usage ideas)
4. ***Optional CB Mic/Mic Stand Holder-see demo video for more details.
*Please note as with all Lo Fi Dynamic microphones, this CB has slightly lower output than your standard dynamic mic (SM57, SM58, etc.)
In some cases (depending on the setup the mic is connected to) an ACTIVE D.I. box may be needed. Contact me for more details.
There is a lifetime warranty on this CB mic. If any problems occur within one year I will cover shipping, parts, labor costs. If any problems occur after one year parts and labor costs are covered, shipping is not. If telephone mic is subjected to abnormal abuse, it will not be covered.
Please see my other listings for other unique instruments and devices.
I have been Circuit Bending, modifying and building electronic instruments and devices since 2002.
All of my devices and instruments are guaranteed to be free of defects in workmanship, added hardware and components-inside and out.
If you have any questions please feel free to contact me and I will help you in any way that I can.
Thanks.